Common spindle fault analysis of winding machine

The winding machine in electrical equipment belongs to more sophisticated equipment, and its various systems use the linkage operation. If any component has problems, the equipment will not be able to process the coil normally. This paper makes a brief description of the common faults of the winding machine spindle system. analysis

(1) The spindle system is faulty due to the winding load. The main reason for these faults is that the user may use the heavy load for a long time, which may cause the failure of the electrical system and the mechanical system. Therefore, it is recommended that the users should not exceed the scope of use specified by the equipment during the processing.

(2) Failure of the spindle system caused by the mechanical transmission parts. The mechanical parts are the main operating components of the winding machine. During the daily winding production and use process, the mechanical parts will always be in a worn state. The wearable parts such as bearings, transmission teeth and belts in the spindle system are the cause of possible failure. Therefore, at the same time of production, it is necessary to do a good job of maintaining and maintaining important parts.

(3) Failure caused by problems in the coordination of the overall system of the winding machine. In the automatic winding machine produced by our company, the control of the whole system is coordinated and unified. If there is an error in a certain link, the spindle system will also malfunction.